A research team led by Sabrina Campagna Zignani and Saveria Santangelo has demonstrated a promising pathway toward scalable and cost-effective green hydrogen production by developing noble-metal-free electrocatalysts derived from high-entropy oxides for zero-gap anion exchange membrane water electrolysis. The experimental investigation, published in Materials for Renewable and Sustainable Energy, addresses the long-standing economic and material limitations associated with conventional low-temperature water-splitting devices. Commercial water electrolysis currently relies on alkaline water electrolysis, which uses highly concentrated caustic potassium hydroxide solutions and porous diaphragms that impose poor gas purity, high safety risks, and low operational current densities, or on proton exchange membrane water electrolysis, which delivers elevated current densities and high-purity hydrogen under differential pressure but strictly requires scarce, expensive noble metal catalysts such as platinum, iridium oxide, and ruthenium oxide alongside costly titanium-based current collectors. By combining the benefits of a solid polymer membrane electrolyte with an alkaline operational environment, anion exchange membrane water electrolysis allows the utilization of earth-abundant transition-metal electrocatalysts, significantly reducing capital expenditure while maintaining compact system architectures and elevated energetic efficiency.
To overcome the complex kinetic barriers of full water splitting, which encompasses the sluggish four-step proton-coupled electron transfer of the anodic oxygen evolution reaction and the cathodic hydrogen evolution reaction, the researchers engineered a family of nanostructured high-entropy oxides based on an equimolar combination of five earth-abundant transition metals: chromium, manganese, iron, cobalt, and nickel. High-entropy materials incorporate five or more elemental species into a homogeneous single-phase crystal lattice characterized by elevated configurational entropy, severe lattice distortion, and an abundant distribution of tunable catalytic active sites. The synthesis protocol relied on an aqueous sol-gel method, offering an inherently scalable route appropriate for mass industrial fabrication without demanding complex purification sequences. Following sol-gel processing, dried precursor gels underwent calcination in static air at thermal setpoints spanning 400, 500, 600, and 800 degrees Celsius in a muffle furnace. To introduce catalytic surface defectiveness, enhance accessible porosity, generate oxygen vacancies, and kinetically preserve high-temperature metastable solid solutions, the heated oxides were subjected to rapid uncontrolled cooling down to room temperature immediately upon removal from the furnace.
A notable feature of the experimental design was the paired utilization of identical oxide precursor batches to fabricate both the oxygen-evolving anode and the hydrogen-evolving cathode within a unified membrane electrode assembly. While pristine calcined oxides served directly as anodic electrocatalysts, cathode materials were prepared by subjecting portions of each synthesized high-entropy oxide powder to an ex situ chemical reduction in a flowing five percent hydrogen-argon gas stream for thirty minutes. Reduction temperatures for each specific material were determined via temperature-programmed reduction analysis using an AMI-300 instrument, yielding reduced multi-metallic compounds containing metallic face-centered cubic nickel and alpha-cobalt phases alongside residual crystalline spinel frameworks. Comprehensive structural and physical characterization using scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy revealed that the average oxide nanoparticle diameter increased systematically with calcination temperature, expanding from approximately 9 to 13 nanometers at 400 degrees Celsius up to 70 to 110 nanometers at 800 degrees Celsius. In all samples, the crystallite dimensions matched individual particle sizes, indicating that the agglomerated nanoparticles were predominantly single crystals.
Powder X-ray diffraction and Rietveld refinement profiles demonstrated clear temperature-governed phase transformations that profoundly influenced electrochemical behavior. Diffractograms collected for pristine oxides calcined at 400 and 500 degrees Celsius revealed that a fraction of the transition metals segregated into a secondary rock-salt structure alongside the primary spinel lattice, yielding oxide phase purities of 89 percent and 95 percent, respectively. In contrast, thermal treatment at 600 and 800 degrees Celsius generated pure single-phase cubic spinel oxides possessing the Fd3̅m space group. Although the configurational entropy decreased at elevated temperatures due to altered cation distribution, higher calcination temperatures enlarged the entropic contribution in the Gibbs-Helmholtz thermodynamic relationship, thermodynamically favoring single-phase solid solutions. In reduced cathode powders, Rietveld analysis confirmed incomplete reduction restricted primarily to near-surface regions, leaving behind significant residual spinel fractions ranging from 49 to 68 weight percent. The reduced material calcined at 600 degrees Celsius achieved the highest phase purity, containing 39 weight percent face-centered cubic metallic phase alongside the preserved spinel framework, whereas the remaining reduced counterparts displayed three co-existing crystallographic phases.
Surface spectroscopy provided crucial insights into the oxidation states and defect structures that govern electrocatalytic activity across the calcination series. High-resolution X-ray photoelectron spectroscopy performed on core levels revealed that chromium existed on pristine surfaces as trivalent oxide, trivalent hydroxide, and hexavalent oxide species, with the hexavalent chromium fraction increasing steadily at higher calcination temperatures while chromium hydroxide concentrations concurrently dropped. Manganese exhibited a trivalent oxidation state, iron appeared predominantly as trivalent iron, and cobalt and nickel displayed divalent states in both monoxide and hydroxide chemical environments. The relative concentration of oxygen vacancies on catalyst surfaces, determined from oxygen 1s core-level spectra, increased with calcination temperature, mirroring trends observed in the intensity ratio of asymmetric stretching modes in micro-Raman scattering. These surface vacancies expose under-coordinated redox-active metal sites and promote intermediate adsorption during water oxidation. Furthermore, Raman spectroscopy confirmed that the degree of spinel inversion increased with calcination temperature, shifting the electronic occupancy of transition metal eg orbitals at octahedral lattice sites toward values that optimize interfacial electron transfer during the oxygen evolution reaction.
Complete zero-gap single cells were assembled to evaluate performance under realistic operational conditions. Membrane electrode assemblies featured an active area of 5 square centimeters compressed at 2.5 Newton meters per tie rod between nickel plates with serpentine flow field channels and Teflon sealing gaskets. Solid polymer electrolyte separation was provided by a 50-micrometer commercial Fumatech FAA3-50 anion exchange membrane containing quaternary ammonium functional groups, activated in 3 molar sodium chloride for 72 hours and converted into hydroxide form for 24 hours prior to assembly. Anodic catalyst inks formulated with a commercial 10 weight percent Fumatech ionomer binder were spray-coated onto three-dimensional porous nickel felt current collectors at a catalyst loading of approximately 2.5 milligrams per square centimeter. Cathodic inks containing the hydrogen-reduced electrocatalysts were spray-deposited onto hydrophobic carbon paper current collectors at a loading of approximately 3.0 milligrams per square centimeter. The assembled single cells operated at atmospheric pressure and 50 degrees Celsius, receiving a continuous anode feed of 1 molar potassium hydroxide solution delivered at 5 milliliters per minute by a peristaltic pump.
Electrochemical evaluation of seven distinct membrane electrode assemblies—comprising four symmetric configurations where anode and cathode originated from identical calcination temperatures and three asymmetric configurations pairing an 800-degree-calcined cathode with varying anodes—established definitive hierarchy in cell performance. Galvanostatic polarization curves recorded at the end of operational testing revealed that cell performance improved non-monotonically across symmetric assemblies in the temperature order of 400 degrees Celsius, followed by 800 degrees, 500 degrees, and culminating at 600 degrees Celsius. The symmetric membrane electrode assembly utilizing electrodes calcined at 600 degrees Celsius demonstrated outstanding electrocatalytic metrics, achieving a current density of 1.33 amperes per square centimeter at a cell potential of 1.93 volts in 1 molar potassium hydroxide at 50 degrees Celsius. At the designated 2.2-volt cut-off potential, this optimum symmetric cell maintained 1.33 amperes per square centimeter, markedly outpacing the 400-degree baseline cell which delivered merely 0.29 amperes per square centimeter under identical operational parameters.
Electrochemical impedance spectroscopy conducted at cell potentials of 1.8 and 2.0 volts provided quantitative mechanistic justification for the observed polarization performance. Series resistance, extracted from high-frequency real-axis intercepts on Nyquist plots, was significantly elevated in cells utilizing 800-degree-calcined anodes due to severe particle coarsening and reduced surface contact, whereas polarization resistance, determined from the difference between low- and high-frequency intercepts, systematically decreased across all assemblies between the beginning and end of testing. This polarization resistance reduction correlated directly with operational activation, improved membrane-electrode interfacial contact, and catalyst layer wetting. Crucially, the measured polarization resistance at the end of testing scaled in the exact inverse order of maximum current density. In the 600-degree-calcined anode, the optimal convergence of a pure single-phase spinel structure, modest crystallite dimensions of approximately 30 nanometers, shortened charge transport pathways, elevated surface area, and appropriate surface oxygen vacancy densities minimized kinetic activation barriers, avoiding the deleterious grain growth of 800-degree materials and the phase segregation observed at lower temperatures.
To evaluate long-term practical durability under demanding conditions, the researchers subjected the high-performing symmetric assembly to extended galvanostatic testing at 50 degrees Celsius with recirculated 1 molar potassium hydroxide. When challenged with a continuous 1100-hour operational protocol under a stepped current loading regimen escalating progressively from 0.1 to 1.0 ampere per square centimeter, the cell maintained stable operation without experiencing destructive voltage drift, keeping the cell potential continuously below 2.1 volts. In polarization measurements, the assembly achieved an end-of-test current density of 1.72 amperes per square centimeter at 2.2 volts—equivalent to 2.03 volts after uncompensated solution resistance correction—representing a 7.2-fold current increase relative to initial baseline values of 0.24 amperes per square centimeter at 2.11 volts corrected. This 1100-hour continuous operating lifespan exceeded by more than seven times the durability documented for analogous membrane electrode assemblies fabricated with low-entropy bimetallic oxide electrocatalysts tested under identical laboratory protocols, underscoring the stabilizing influence of high configurational entropy.
The authors noted that while platinum-group benchmarks may still exhibit slightly lower initial overpotentials, these earth-abundant high-entropy oxides offer an exceptional balance of activity, stability, and synthesis scalability for practical anion exchange membrane water electrolysis, with future developmental efforts dedicated to eliminating remaining critical raw materials from multicomponent formulations.
Subject of Research: Anion exchange membrane water electrolysis using precious-metal-free high-entropy oxide electrocatalysts
Article Title: Green hydrogen production via anion exchange membrane water electrolysis by precious metal-free high-entropy oxides
Article References: Campagna Zignani, S., Fazio, M., Pascale, M., Alessandrello, C., Triolo, C., Musolino, M. G., & Santangelo, S. (2026). Green hydrogen production via anion exchange membrane water electrolysis by precious metal-free high-entropy oxides. Materials for Renewable and Sustainable Energy, 15(3), Article 33. https://doi.org/10.1007/s40243-026-00372-8
Image Credits: AI Generated
DOI: 10.1007/s40243-026-00372-8
Keywords: anion exchange membrane water electrolysis, green hydrogen, high-entropy oxides, electrocatalysis, oxygen evolution reaction, hydrogen evolution reaction, water splitting, spinel oxides, precious-metal-free catalysts, sol-gel synthesis, membrane electrode assembly, durability testing, electrochemical impedance spectroscopy, transition metals, potassium hydroxide electrolyte, zero-gap cell